Loading...

Forum Index > Designing the Insulation Grounding Structure of DOME Fiber Closure

closure 11 months ago
ActivityRank: 0

Reasonably Designing the Insulation Grounding Structure of the Greentel DOME Fiber Closure: Insulating spacers conventionally used in fiber optic splice closures typically consist of two spacers. The upper washer is a grooved washer and the lower washer is a protruding washer. Since the fixing bolt is connected with the reinforcing core of the optical cable, the upper and lower insulating spacers can be combined to form the insulation between the metal component of the fiber optic splice closure and the cable reinforcing core . In the compressive strength test, a 15 kV DC voltage is applied between the fixing bolt and the metal part. Most of the materials used for insulating gaskets are high-molecular polymers. The dielectric strength of these materials is relatively high, typically 500 to 1000 megavolts/meter. Therefore, theoretically, only 0.1 mm of polymer-based insulation between two electrodes provides 15 kV protection.

However, in fact, the insulating sheet used in the fiber optic splice closure cannot be complete. Since the structure is determined by the fact that it must be superposed by two parts, there must be a gap, in which case the gap is inevitable. Air is present, so at the same time the dielectric strength of the air and possible air and creeping discharges must be taken into account. However, since the air passage existing in the gap is not a straight line, but is a polygonal line or a curved line, the distance between the shortest air passages between the two poles is the most dangerous distance. Therefore, the tested insulation performance when there is a polymer insulating material is actually the shortest distance test of the gap pipe in the two pieces of insulating sheet.

According to the standard, fiber optic splice closure in front of the voltage resistance strength test must be in 1.5 meters deep water soak for 24 hours, so if the seal is not good, lead to water vapor infiltration, will inevitably affect the voltage resistance. However, the probability of this situation is relatively small compared with the above mentioned situations, so it is appropriate to pay attention to it.


Maybe you can tell us what your need, fiber closure manufacturer: https://www.greentelftth.com/ will recommend the suitable fiber closure for you as soon as possible.

Latest Activity

posted a new message on the forum Hp Printer Support Number.
9 days ago
posted a new message on the forum Arlo Device Offline | +1-888-352-3810 | Reset Arlo Base Station| Arlo .
9 days ago
posted a new message on the forum https://getwellnessdeal.com/surge-complete/.
9 days ago
replied to a message on the forum RE: Free OSRS Account with Happy Mother's Day.
9 days ago
replied to a message on the forum RE: How to get cheap fifa coins easily and quickly?.
9 days ago
posted a new message on the forum Free OSRS Account with Happy Mother's Day.
9 days ago
posted a new message on the forum kachan on September 18th, .
9 days ago
posted a new message on the forum Multiple Listing Search. .
9 days ago
posted a new message on the forum ntist in Iowa City please visit the website. .
9 days ago

Top Contributors

8587
liamin123
7708
qizhenwang123
6986
chenwen121314
5990
jcy1993225
4712
sk123456

Share